Many consumers are choosing to upgrade their current tank water heater to the new and improved tankless water heater systems that are available. They offer the convenience so having hot water ready immediately when you want it instead of having to wait for it to heat up in a tank as with older models of water heaters. However, it is very important that you understand how to properly install your tankless water heater if you choose to do it yourself.
The most popular type of tankless water heater uses natural gas. There are some safety procedures you need to be aware of before you attempt to install one. The most important rule to follow is to make sure that the natural gas supply valve is completely turned off. You are going to need to disconnect the pipe that runs from the home to the supply of gas. After disconnecting this pipe the gas will flow into the home and it can result in death if you don't shut it off properly.
WATER SOFTENER RATINGS
It isn't difficult to shut off the natural gas supply, but again it is vital that you do so. There is a switch on the side of the gas meter. Move the handle so that it is in the off position. You need to make sure there is absolutely no gas allowed into your home while you are installing the natural gas tankless water heater.
Next you will need to make sure the fittings from the existing pipe match the new pipe on the natural gas tankless water heater. You can measure them on each end to find out. If they are different then you are going to need to purchase the proper fittings so that everything can be aligned properly.
Make sure you thoroughly inspect it to ensure there is enough ventilation after you have installed the natural gas tankless water heater. This includes having a vent that leads to the outside of the home. You won't be able to vent the unit to an indoor area or you run the risk of death from the natural gas being in the home.
Tips For Properly Installing Your Natural Gas Tankless Water Heater WATER SOFTENER RATINGS
0 comments:
Post a Comment